Ceramic & Tile Adhesive
BOYTİM 1051
BOYTİM 1051
Ceramic & Tile Adhesive
Description:
Cement-based ceramic adhesive with reduced slip and extended
time.
Areas of Use:
Applied on materials such as tiles, mosaics, ceramics, etc. to be used
on vertical and horizontal surfaces plastered with lean concrete,
reinforced concrete, or cement plaster both indoors and outdoors.
Advantages:
• Easy to apply
• Does not slip.
• High adhesion strength.
• It can be processed easily and for a long time.
• It can be used on wet floors in the kitchen, bathroom, etc.
Technical Specifications:
Slip: ≤0.5 mm
Application Information:
Application Temperature: (+5°C) – (+35°C)
Mixing Ratio: 6 – 7 lt of water / 25 kg of powder
Usable for: 3 hours
Open waiting time: 30 min.
Application thickness: 3–10 mm
Grouting Time: 24 hours
Consumption Average: 3 – 5 kg / m²
* These values are valid for 23 ° C and 50% relative humidity. Times
may vary depending on ambient conditions.
Surface Preparation:
-The application surface should be made clean from dust, dirt, oil,
paint residue, and similar foreign matters reducing adherence.
-It should be ensured that the application surface is set.
-The surface must be moistened before the application.
-The dusty surface behind the ceramic should be moistened and
wiped.
Mixture Preparation:
25 kg of BOYTİM 1051 is slowly added to 6-7 liters of water. Mixed
until a homogeneous mixture is obtained to leave no lumps with a
trowel or a low-speed mixer. The homogeneous mixture is left for 5
minutes and then mixed again to make it ready for application.
The prepared mixture should be used within a maximum of 3 hours,
the mixtures that are unused during this period should be mixed
intermittently, and any mixture mortar that has started to harden or
has expired should not be used.
Application:
The prepared mixture should be spread on the surface with the flat
part of the trowel to ensure good adhesion and then combed with
a notched trowel suitable for the size of the tile to be used.Ceramics
must be bonded to the combed mortar within 30 minutes. Good
adhesion should be obtained by pressing on the laid material by
hand and applying force with a rubber hammer.
-The adhesive should be used by applying to small areas, and any
adhesive that delays material bonding and that has started to get
crusty should be cleaned by scraping off the surface.
-The excess adhesive in joint gaps should be scraped before drying,
and the mortars on the surface should be cleaned with a damp
cloth.
Applications should not be carried out in temperatures below -5°C.
-It should not be applied on surfaces that are exposed to direct
sunlight and wind without taking protective measures.
-Foreign materials should never be mixed into the mortar.
-After application, all used tools should be washed with plenty of
water before drying.
-Grouting can be started after 24 hours.
-Tiles stuck with BOYTİM 1051 should not be exposed to water for at
least 24 hours.
-Depending on the location and the type of ceramic to be applied,
double-sided bonding should be done.
Warnings:
Do not breathe the product directly, as it is cement-based. Avoid
contact with skin and eyes.
Reference Standard:
TS EN 12004 -1 C1TE class
C:Cement-based
1: Standard performance
T: Reduced slip.
E: Extended open waiting time
Color: Grey
Package: 25 kg. kraft paper bag
Shelf life: 12 months in dry environment and in original packaging
Adhesion Strength
– After Open Waiting Time: After at least 30 min. ≥0.5 N/mm²
– Initial: ≥0.5 N/mm²
– After Dipping in Water: ≥0.5 N/mm²
– After Aging with Heat: ≥0.5 N/mm²
– After Freeze-Thaw Cycle: ≥0.5 N/mm²
Temperature Resistance: (-40°C) – (+80°C)
Reaction to Fire Class: A1
*The above values have been obtained through laboratory tests
and are valid for 28 days of the performance.