Thin Repair Mortar
BOYTİM TP50
Description:
Cement-based polymer and fiber-reinforced thin repair mortar
Areas of Use:
It can be used in the joints of main building elements on interior
and exterior surfaces, in restoration and repair works, and in the
filling of tie-rod holes in tunnel concretes, in fractures, cracks,
holes, and surface losses.
Advantages:
• It adapts easily to the applied surface.
• It displays good performance with its high adherence.
• It provides a smooth and solid surface.
• It is used for fractures, cracks, holes, and surface losses.
Application Information:
Application Temperature: (+5°C) – (+35°C)
Mixing Ratio: 5 – 6 lt water / 25 kg powder
Usable Time: 1 hour
Application Thickness: 1-5 mm
Average Consumption: 1.4-1.8 kg/m² (1 mm for thickness)
*These values are valid for 23°C and 50% relative humidity.
Times may vary depending on ambient conditions.
Surface Preparation:
-The application surface should be made clean from dust,
dirt, oil, paint residue, and similar foreign matters reducing
adherence.
– In surface-mounted applications, the surface must be
completely hardened.
If the surface has low adherence, broken, loose parts, these
parts must be removed from the surface.
-The floor should be dampened, moistened, and saturated with
water.
Mixture Preparation:
25 kg of BOYTİM TP50 is slowly added to 5 – 6 liters of water.
Stirred until a homogeneous mixture is obtained with a trowel
or a low-speed mixer, leaving no lumps.The mortar, which
is rested for 5 minutes, is stirred again before using and its
homogeneity is checked.
Application:
The prepared mixture is filled by applying pressure to the
broken, cracked, broken areas on the floor with a steel trowel.
For smooth surfaces, polishing is done with a damp sponge.
The sponge should be cleaned frequently.
Surfaces where BOYTİM TP50 is applied must be moistened
within 12-24 hours. The second humidification should be done
24 hours after the first humidification. The surface should be
moistened for 2-3 days. Further irrigation increases material
performance.
The expired mortar should not be used.
Should not be applied in temperatures below 5°C.
-Should not be applied on surfaces that are exposed to direct
sunlight and wind without taking protective measures.
-Foreign materials should never be mixed into the mortar.
-After application, all used tools should be washed with plenty
of water before drying.
Warnings:
Do not inhale the product directly, as it is cement-based. Avoid
contact with skin and eyes.
Reference Standard:
TS EN 1504-3 / R1 Class
Color: Grey
Package:25 kg kraft bag
Shelf life: 12 months in dry environment and in original package
Adhesion Strength
Adhesion Strength: ≥ 0.5 N/mm²
Flexural Strength: ≥ 3 N/mm²
Compression Strength: ≥ 10 N/mm²
Fire Reaction Class: A1
*The above values are valid for 28 days of performance that was
obtained as a result of laboratory experiments.