BOYTİM 910
Cement-Acrylic Based, Extra Flexible
Waterproofing Material
Description:
Cement-acrylic based, two-component, extra
flexible waterproofing, and concrete protection
mortar with superior properties provided by
water impermeability chemicals.
Areas of Use:
It can be used in all kinds of concrete, screed,
and plaster surfaces, swimming pools and
thermal pools (covered with ceramic coating),
walls and floor coverings of cold storage,
potable water tanks, and wet areas, such as
WC, balcony, bathroom, kitchen, terraces,
and curtain walls, where impermeability and
protection are required.
Product Benefits:
• Easy to apply
• High adhesion strength.
• Absorbs expansion thanks to its highly elastic
structure.
• Resistant to freeze-thaw effects.
• Resistant to salt solutions, seawater, and
chlorine ions.
• Crack bridging ability
• Ideal waterproofing material prior to ceramic
coating or screed.
• Not corrosive for reinforcement.
• Creates a seamless, jointless, waterproof, and
solid layer with its fully flexible structure.
• Used in places such as water storage tanks,
pools, wet areas, spa, etc.
• Suitable for use for potable water tanks.
Application Information:
Application Temperature: (+5 °C) – (+35 °C)
Mixing Ratio: 10 kg liquid / 20 kg powder
Workability Time: 2 Hours
Waiting Time between Coats: 5- 6 hours
Setting Time: 1 week
Consumption Average: First coat: 1.70 kg / m²
(For 1 mm thickness depending on surface
roughness)
Second coat: 1.50 kg / m² (For 1 mm
thickness depending on surface roughness)
Third coat: 1 kg / m² (For 1 mm
thickness depending on the surface
roughness)
* These values are valid for 23 °C and 50%
relative humidity. The required period may vary
depending on ambient conditions.
Surface Preparation:
– The application surface should be cleaned
from dust, dirt, oil, paint residue, and other
similar adherence reducing impurity.
– The application surface should be set.
– Any surface defects, roughness, and eyelet
pores should be repaired with BOYTİM PLASTER
1 day before the application and chamfers
edges should be made.
-The floor should be dampened, moistened,
and saturated with water.
Mixture Preparation:
Pour 10 kg liquid component into a container
and then slowly add 20 kg BOYTİM 910 powder.
The mixture should be stirred at low-speed for
at least 3 minutes until a homogenous and
flowing mixture is obtained. Rest the mortar for
5 minutes and then stir for 30 seconds before
the application and the mortar will be ready
to use.
Application:
The mixture is applied to the surface with a
brush or roller with at least two layers. It should
be applied by feeding thoroughly to cover the
entire surface to prevent formation of surface
pores. Allow at least 5 hours dry time before
applying second coat. The second coat should
be applied just like the first coat. However,
each coat should be vertical to the previous
coat. Application made in 90 degrees rotation
eliminates the risk of pores. Wait for maximum 1
day between each coat to be applied.
It should be applied in at least 2 coats.
Depending on the water level, 3 coats may be
required.
– Apply chamfering tape to the corners and
joints in the application area. If there is no
chamfer band, the joints should be ovalized
and the mortar should be reinforced with mesh.
-In case of heavy pedestrian flow, the
application surface should be covered with a
protective coating material such as screed and
ceramic.
– Wait for at least 7 days for the application
surface to be opened for use and flooring