Porcelain Ceramic, Marble And Granite Ceramic Adhesive
BOYTİM 1055 TECHGRANITE
Description:
Cement-based, high-performance glazed porcelain, porcelain ceramic,
marble and granite ceramic adhesive with reduced slip and improved
with additional properties.
Areas of Use:
Used to bond glazed porcelain, porcelain ceramic, glass mosaic, marble
and granite ceramic coatings to surfaces plastered with lean concrete,
concrete or cement plaster on walls and floors indoors and on floors
outdoors.
Advantages:
• Adapts easily to the applied surface.
• Does not slip.
• High adhesion strength.
• It can be processed easily and for a long time.
• Has water impermeability thanks to its high polymer content. It can be
used in bonding applications in wet volumes.
• Ideal for coating materials such as large glazed porcelain, porcelain
ceramic and granite ceramic.
Application Information:
Application Temperature: (+5°C) – (+35°C)
Mixing Ratio: 6 – 7 lt of water / 25 kg of powder
Usable for: 3 hours
Open waiting time: 30 min.
Application thickness: 3–10 mm
Commissioning Time: 24 hours
Consumption Average: 4 – 6 kg/m²
Reaction to Fire Class:A1
*These values are valid for 23°C and 50% relative humidity. Times may
vary depending on ambient conditions.
Surface Preparation:
-The application surface should be made clean from dust, dirt, oil, paint
residue, and similar foreign matters reducing adherence.
-It should be ensured that the application surface is set.
-The floor should be dampened, moistened, and saturated with water.
Mixture Preparation:
25 kg BOYTİM 1055 TECHGRANİTE is slowly added to 6-7 liters of water.
Mixed until a homogeneous mixture is obtained to leave no lumps with
a trowel or a low-speed mixer. The homogeneous mixture is left for 5
minutes and then mixed again to make it ready for application.
The prepared mixture should be used within a maximum of 3 hours, the
mixtures that are unused during this period should be mixed
intermittently, and any mixture mortar that has started to harden or has
expired should not be used.
Application:
The prepared mixture should be spread on the surface with the flat part
of the trowel to ensure good adhesion and then combed with a toothed
trowel suitable for the size of the tile. Ceramics should be bonded to the
combed mortar within 30 minutes. Good adhesion should be obtained
by pressing on the laid material by hand and applying force with a
rubber hammer.
-The adhesive should be used by applying to small areas, and any
adhesive that delays material bonding and that has started to get crusty
should be cleaned by scraping off the surface.
– The excess adhesive in joint gaps should be scraped off before drying,
and the mortars on the surface should be cleaned with a damp cloth.
– Should not be applied in temperatures below -5°C.
– It should not be applied on surfaces that are exposed to direct sunlight
and wind without taking protective measures.
– Foreign materials should never be mixed into the mortar.
– After application, all used tools should be washed with plenty of water
before drying.
– Grouting can be started after 24 hours.
– Tiles bonded with BOYTİM 1055 TECHGRANİTE should not be exposed to
water for at least 24 hours.
– Depending on the location and the type of ceramic to be applied,
double-sided bonding should be done.
Warnings:
Do not breathe the product directly, as it is cement-based. Avoid contact
with skin and eyes.
Reference Standard:
TS EN 12004 -1 C2TE class
C: Cement-based
2: Improved with additional properties
T: Reduced slip.
E : Extended open time
Color: White ,Gray
Package: 25 kg. kraft paper bag
Shelf life: 12 months in dry environment and in original packaging
Adhesion Strength
Slip: ≤ 0.5 mm
Adhesion Strength:
– After Open Waiting Time: After at least 30 min. ≥ 0.5 N/mm²
– Initial: ≥ 1 N/mm²
– After Immersion: ≥ 1 N/mm²
– After Aged with Heat: ≥ 1 N/mm²
– After Freeze-Thaw Cycle: ≥ 1 N/mm²
Temperature Resistance : (-30°C) – (+70°C)
*The above values have been obtained through laboratory tests
and are valid for 28 days of the performance.